Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
77
Chapter 2 Convenient Features
Tips
• If a bootable device is newly connected, the priority lowest in its BBS
Priorities is assigned to that device.
• If a bootable device is disconnected from the server, the relevant device is
removed from BBS Priorities.
• When Load Setup Defaults is executed on Save & Exit menu, the Boot
Option and BBS Priorities are changed as follows.
 Boot Option Priorities
 Boot Option #1: CD/DVD ROM Drive
 Boot Option #2: Floppy Drive
 Boot Option #3: Hard Drive
 Boot Option #4: Network Device
 The priority of bootable devices in BBS Priorities are determined as
follows:
Devices other than USB device (e.g., SATA device, RAID): High
USB device: Next to non-USB devices
 If a bootable device has been set to Disabled, cancel the Disabled
status, and register the device in BBS Priorities.
• If a Remote Management Extended License (*1) is registered, the remote
media is added to bootable devices. The remote media is assigned as
follows:

The highest priority within "CD/DVD ROM Drive BBS Priorities" is
assigned to AMI Remote CD/DVD device.
 When executing Load Setup Defaults in Save & Exit menu, the
highest priority within "CD/DVD ROM Drive BBS Priorities" is assigned
to AMI Remote CD/DVD device.
(*1) Refer to EXPRESSSCOPE Engine 3 User's Guide for details of Remote Management Extended License.