Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
76
Chapter 2 Convenient Features
1.2.5
Boot
If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Option Parameter Descriptions
Boot Configuration
− −
Quiet Boot
Disabled
[Enabled]
When this option is set to Disabled, the results of
POST execution are displayed instead of the NEC
logo after the power is turned on.
If BIOS Redirection Port is enabled, this option is
shown as Unavailable and inaccessible (the Quiet
Boot feature is always disabled).
Bootup Numlock State
On
[Off]
Enable or disable Numlock.
Setup Prompt Timeout
[0]
Number
Specify the time (in seconds) until the <F2> is pressed
to launch SETUP. The specified value is reflected to
waiting time immediately before completion of POST.
Boot Option Priorities
− −
Boot Option #1
− These items display the priority of boot devices.
If all of the Boot Options are set to Disabled, the
SETUP starts running upon completion of POST.
Boot Option #2
−
Boot Option #3
−
Boot Option #4
−
CD/DVD ROM Drive BBS Priorities
− Specify the boot priority for each BBS.
Floppy Drive BBS Priorities
−
Hard Drive BBS Priorities
−
Network Drive BBS Priorities
−
[ ]: Factory setting