Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
72
Chapter 2 Convenient Features
1.2.4
Server
If you move the cursor to Server, the Server menu screen appears. For the menu that has on the left,
move the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
(1/2)
Option Parameter Descriptions
System Management
− −
Assert NMI on PERR
Disabled
[Enabled]
Specify whether to support PCI PERR.
Assert NMI on SERR
Disabled
[Enabled]
Specify whether to support PCI PERR.
FRB-2 Policy
[Retry 3 Times]
Disable FRB2 Timer
Always Reset
Specify how the system should operate if
FRB level 2 errors occur.
Boot Monitoring
[Disabled]
5-60 minutes
Enable or disable the boot monitoring feature
and specify the timeout period. To use this
feature, install NEC ESMPRO Agent on
Windows. If starting up an OS on which it is
not installed, disable this feature.
Boot Monitoring Policy
[Retry 3 times]
Always Reset
Specify the processing to be done when
time-out was enforced during boot
monitoring. This is configurable only if Boot
Monitoring has been enabled.
Retry 3 times resets the server upon the
timeout and attempts to boot OS up to three
times.
Always Reset retries booting the OS
repeatedly.