Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
62
Chapter 2 Convenient Features
(5) SATA Configuration submenu
From the Advanced menu, select SATA Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has on the left, move the cursor to it and then press the <Enter> key
to show its submenus.
For details about the options, see the table below.
Option Parameter Descriptions
SATA Information
− This option is not displayed when SATA Mode
is set to RAID Mode.
SATA Mode
Disabled
[IDE Mode]
AHCI Mode
RAID Mode
Set SATA Mode.
For the models that show RAID Mode, this
option is only for display.
Hard Disk Drive Pre-Delay
[Disable]
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Specify delay time before HDD is accessed
during POST.
[ ]: Factory setting
Note
NEC has not verified AHCI driver support.