Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
59
Chapter 2 Convenient Features
(3) PCI Configuration submenu
From the Advanced menu, select PCI Configuration and then press the <Enter> key to display the menu
screen as shown below.
For details about the options, see the table below.
Option Parameter Descriptions
PCI Link Speed Settings
－ －
ASPM Support
[Disabled]
Auto
Force L0s
Specify the level of Active State Power
Management. If Auto is selected, the level
supported by the system is automatically set. If
Force L0s is selected, all links are forcibly set
to L0s.
LAN Controller
Disabled
[Enabled]
Enable or disable the on-board LAN controller.
LAN1 Option ROM Scan
Disabled
[Enabled]
Enable or disable the option ROM SCAN for
on-board LAN 1.
LAN2 Option ROM Scan
[Disabled]
Enabled
Enable or disable the option ROM SCAN for
on-board LAN 2.
PCI Slot 1 Option ROM
PCI Slot 2 Option ROM
(PCI Slot 3 Option ROM)
(PCI Slot 4 Option ROM)
Disabled
[Enabled]
Enable or disable the option ROM on each
PCI board.
PCI Slot 3 Option ROM and PCI Slot 4
Option ROM are displayed only on server of
air-cooling system model.
[ ]: Factory setting
Note
For a RAID Controller, LAN card (network boot), or Fibre Channel controller, if no
Hard Disk Drive on which an OS is installed is connected, set the option ROM for
that slot to Disabled.