Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
53
Chapter 2 Convenient Features
The table below shows the items you can configure on the Main menu.
Option Parameter Descriptions
BIOS Information
− −
BIOS Version
− Displays the BIOS version (display only).
Build Date
MM/DD/YYYY Displays the BIOS build date (display only).
Access Level
[Administrator]
User
Displays the access level of the login user,
Administrator or User (display only).
If no password is specified, Administrator is
displayed.
Memory Information
−
−
Total Memory
−
Displays the basic memory capacity (display
only).
System Language
[English]
Français
Español
Deutsch
Italiano
Select the display language for the BIOS.
If you run SETUP with BIOS Redirection Port
enabled, English is automatically selected for
System Language. At that time, you cannot
change setting of System Language.
If BIOS Redirection Port is disabled, the
language set in this option is used at the next
startup of SETUP, and you can change the
language setting.
System Date
WWW MM/DD/YYYY Set the system date.
System Time
HH:MM:SS Set the system time
[ ]: Factory settings
Tips
Be sure to confirm that the date and time in the BIOS parameters are correctly
configured. In any of the following situations, check the system time before using
the server.
• After transporting the server
• After removing the server from storage
• After the server wakes up from hibe
rnating in an environment out of the
guaranteed operating range (temperature: 10°C to 40°C; humidity: 20% to 80%
Check the system clock monthly. Additionally, if you implement the server in a
system that requires highly accurate time, use of a time server (an NTP server) is
recommended.
If the system time becomes considerably slow or fast over time even though you
regularly adjust it, contact the dealer where you purchased the server or the
maintenance service company for maintenance.