Maintenance Manual

8. System Diagnostics
Express5800/GT110e-S Maintenance Guide
45
Chapter 1 Maintenance
8.
System Diagnostics
The System Diagnostics runs several tests on the server.
8.1
Test Items
The following items are tested in system diagnostics
• Memory
• CPU cache memory
• Hard Disk Drive
Important
Before executing the system diagnostics, be sure to disconnect the LAN
cable. Executing the system diagnostics with the LAN cable connected may
affect the network.
Tips
On checking the Hard Disk Drive, no data is written to the disk.
8.2
Startup and Exit of System Diagnostics
Start up System Diagnostics in the following procedure. (If the server is running, shutdown the system.)
1. Start up EXPRESSBUILDER and select Tool menu from Boot menu.
For information on starting up EXPRESSBUILDER, refer to Chapter 2 (5. Details of
EXPRESSBUILDER).
Note In case Language selection menu appears, select English.
2. Select Test and diagnostics.
Select End-User Mode to start system diagnostics. This process takes about three minutes.
When the diagnostics is completed, the screen display changes as shown below.