Maintenance Manual

5. Troubleshooting
Express5800/GT110e-S Maintenance Guide
30
Chapter 1 Maintenance
[?] OS does not start with the /3GB switch
→ In Windows Server 2003 x86, System may fail to start the OS with the /3GB switch.
In this case, please adjust the capacity of the user mode area using the /userva switch in reference to
the following URL.
http://support.microsoft.com/kb/316739/en-us
[?] The system displays the message below and fails to log on:
Windows Product Activation
This copy of Windows must be activated with
Microsoft before you can continue.
You cannot log on until you activate Windows.
To shut down the computer, click [Cancel].
Yes (Y) No (N) Cancel
 Is the Windows product license authentication procedure completed?
→ In Windows Server 2003, the above message will be displayed if you use the operating system without
executing the license authentication. Select [Yes], and execute the procedure for license authentication.
[?] The following message appears when logging in the system on Windows Server 2008 R2 or Windows
Server 2008:
 Have you finished license authentication for Windows product?
→ The above message will appear if you use Windows Server 2008 R2 or Windows Server 2008 with the
unauthenticated license.
Select [Get Genuine now] and proceed license authentication.
The above message is an example of request for license authentication. The message displayed on
screen may differ from this depending on the license.