Maintenance Manual

5. Troubleshooting
Express5800/GT110e-S Maintenance Guide
27
Chapter 1 Maintenance
[?] When Windows Server 2008 R2 is installed while several disks are connected, the system partition and
the boot partition (100 MB) are sometimes created in another disk
→ For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2530901/ja
(Japanese only)
[?] When Starter Pack is executed on Windows Server 2008 R2, the below message is sometimes displayed
for a moment upon shutdown
→ No problems for system operation.
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/975777/en-us
[?] Windows Server 2003 R2 DISC 2 was installed after the Windows Server 2003 Service Pack had been
applied
→ Reapply the Service Pack. If you applied the Service Pack even once after installing Windows Server
2003 R2 DISC 2, you need not reapply it.
* If the Service Pack application is unknown when you install Windows Server 2003 R2 DISC 2, NEC
recommends that the Service Pack be reapplied.
[?] The message “PCI Express Correctable” is registered in the DMI event log when installing Windows.
→ This message may be registered when installing Windows. There is no operational problem.
[?] The system was installed as Workgroup although it is set to join the domain
 Is the LAN cable properly connected?
→ If the LAN cable is not connected, the system is installed in workgroup setting, not in domain join setting.
After the OS is started, join the domain.
[?] The following functions are installed when Windows Server 2008 R2 or Windows Server 2008 was set up
using EXPRESSBUILDER and when IISis installed.
 Windows Process Activation Service
− Process Model
− Configuration APIs
 Remote Server Administration Tool
− Role Administration Tools
− Web Server (IIS) Tools
→ The features listed above are activated because they are required for the installation of IIS basic
features.
1 program still needs to close:
(Waiting for) Task Host Window