Maintenance Manual

5. Troubleshooting
Express5800/GT110e-S Maintenance Guide
23
Chapter 1 Maintenance
[?] POST does not complete
 Is memory installed correctly?
→ You must install at least 1 DIMM for the server to operate.
 Is the memory size large?
→ The memory check may take longer than usual if the installed memory size is large. Wait for a while.
 Did you perform any keyboard or mouse operation immediately after you started the server?
→ If you perform any keyboard or mouse operation immediately after start-up, POST may accidentally
detect a keyboard controller error and stops processing. In such a case, reboot the server. Do not
perform any keyboard or mouse operation until the BIOS start-up message appears after you reboot the
server.
 Are memory and PCI devices supported for use with this server?
→ Operation of the server with unauthorized devices is not guaranteed.