Maintenance Manual

1. POST Error Message
Express5800/GT110e-S Maintenance Guide
123
Chapter 3 Appendix
(3/3)
BMC Message on Lower LCD Line Description Action
Node Manager can't
communicate BMC
Abnormality in Node Manager
occurred.
Turn off the power, wait for about 30
seconds, and restart the server. If this
does not resolve the problem, contact
your service representative.
Node Manager Firmware Image
execution Failed
Node Manager Firmware Flash
Erase Error
No
de Manager Firmware Flash
Corrupted
Node Manager Internal Error
Node Manager can't
communicate BMC
Node Manager Manufacturing
Error
Node Manager Persistent
Storage Integrity Error
Drive 0 Fault
Operation was performed during
Hard Disk Drive failure
Drive 1 Fault
Drive 2 Fault
Drive 3 Fault
Drive 4 Fault
Drive 5 Fault
System FAN1 Lower
Non-Critical
A fan alarm was detected.
It is possible that a fan has failed or is
clogged. Contact your service
representative and request repairs.
System FAN2 Lower
Non-Critical
System FAN3 Lower
Non-Critical
System FAN4 Lower
Non-Critical
System FAN5 Lower
Non-Critical
System FAN6 Lower
Non-Critical