Maintenance Manual

Express5800/GT110e-S Maintenance Guide

NEC Express5800 Series

Express5800/GT110e-S

Maintenance

This chapter explains inspection and maintenance procedures, and what actions are to be taken in case of

trouble when operating this server.

1. Transfer, Movement, and Disposal

Describes how to transfer and move this server to a third party. Also describes how to dispose and store this

server.

2. Daily Maintenance

Describes what you must confirm for daily use, how to manage files, and how to clean the server.

3. User Support

Describes various services on this product. Services are offered from NEC and the maintenance service

companies authorized by NEC.

4. Collecting Failure Information

Describes how to collect information about the location where a failure occurred and its cause when the

server malfunctions. Refer to this chapter in case of a failure.

5. Troubleshooting

Describes how to identify the causes of problems and what actions are to be taken to address them. Refer to

this chapter when you suspect a failure.

6. Windows System Recovery

Describes Windows recovery setup. Refer to this chapter when the Windows is corrupt.

7. Resetting and Clearing the Server

Describes how to reset or clear the server. Refer to this chapter when the server is not working or when you

wish to restore the settings made in BIOS to the factory settings.

8. System Diagnostics

Describes system diagnostics of this server and checking connection status check.

9. Offline Tools

Describes tools for preventive maintenance of this product.