Maintenance Manual

1. POST Error Message
Express5800/GT110e-S Maintenance Guide
114
Chapter 3 Appendix
1.
POST Error Message
When an error is detected by POST, which is executed after the server is turned on, the display shows an error
message. In addition, depending on the error contents, the computer might beep to report that an error occurred.
System Monitoring Check
... Passed
ERROR
AE81: DIMM1 with error is enabled.
AE02: DIMM2 has been disabled.
Press <F1> to resume, <F2> to setup
Messages indicating a memory error
(in this example, the message indicates
that DIMM1 and DIMM2 have failed, and
that DIMM1 has been forcibly started up)
The following table lists error messages and the actions to take in response to them.
Tips
• Write down the displayed messages and beep patterns before contacting a
maintenance service company. Alarm messages are useful information for
maintenance.
• The list only contains messages for the server.
For details about error
messages for optional devices
, and the actions to take, refer to the
manuals that come with each product.