Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
97
Chapter 1 Installing Windows
Note
Enter a computer name and administrator password that satisfies the following
conditions:
−
Contains 6 or more characters
−
Contains characters from at least three of the following categories: numbers,
uppercase letters, lowercase letters, and symbols.
Tips
• The computer name has been assigned by automatic assignment function. If
you need to assign another computer name, remove the checkmark from "Auto",
and enter the desired computer name.
• If a parameter file is used for setup or if you return to a previous screen, •••••• is
displayed in the Administrator password and Confirm Administrator password
text boxes even if no value has been entered.
(6) Set up the network.
Confirm settings on the dialog shown below, change them as needed, and then click [Next].
Tips
The order of entry in Custom settings may differ from the numbering of LAN ports.
(7) Enter the domain or workgroup name to be used.
Confirm settings on the dialog shown below, change them as needed, and then click [Next].