Installation Guide

3. Setting Up Windows Server 2008 R2
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
55
Chapter 1 Installing Windows
3.4
Installing Starter Pack
Starter Pack contains drivers customized for this server. Be sure to apply Starter Pack before running the
system.
Important
Also install Starter Pack in the following cases.
−
The system configurations have changed (when internal option devices
have been added or removed)
If a dialog box prompting you to restart appears after changing system
configurations, click [No] and then install Starter Pack.
−
If the system was restored using a restore process
−
If a system has been restored using the backup tool
Note
The Scalable Networking Pack (SNP) function is disabled upon Starter Pack
installation is complete.
The setting of SNP function may affect the system performance.
Tips
If the OS is installed by using EXPRESSBUILDER, Starter Pack is already applied.
If the configuration is not changed, you do not need to apply Starter Pack again.
3.4.1
When using EXPRESSBUILDER DVD
1. Log on to the system with the built-in administrator, which has administrative privileges.
2. Insert EXPRESSBUILDER DVD into the optical disk drive.
3. Start the installer of Starter Pack according to the installation type.
Full installations
When Autorun Menu appears, click Set up Windows to open the short-cut menu and then select
Install Starter Pack.