Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
3. Setting Up Windows Server 2008 R2
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
48
Chapter 1 Installing Windows
21. When the following message appears, click [Install Now ].
Windows Server 2008 R2 installation starts.
- If the following message appears, go to step 22.
- If not go to step 24.
Load Driver
A required CD/DVD drive device driver is missing. If you have
a driver floppy disk, CD, DVD, or USB flash drive, please insert
it now.
Note: If the Windows installation media is in the CD/DVD drive,
you can safely remove it for this step.
[Browse] [OK] [Cancel]
Tips
• The above message appears if you are using an onboard RAID controller (LSI
Embedded MegaRAID) in an environment equipped with an internal DVD drive.
• When this message appears, the message will say “CD, DVD, or USB flash
drive”, but use Internal Flash Memory or removable media with the OEM
drivers copied onto it.
22. Select the destination, and then click [OK].
If using OEM drivers (made at step 17)
Removable media:\OEM_Driver\ws2008r2\megasr1
If using Internal Flash Memory
Internal Flash Memory:\024\win\winnt\oemfd\ws2008r2\megasr1
Tips
The volume label of Internal Flash Memory is INTER-FLASH.
23. Select LSI Embedded MegaRAID, and then click [Next].