Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
3. Setting Up Windows Server 2008 R2
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
37
Chapter 1 Installing Windows
Server Core installations:
When the following screen appears, enter your password into the text box, and then click
.
20. Click [OK] in the Setup Complete window.
21. Follow the instructions described in Chapter 1 (3.5 Setting Up Device Drivers) to set up the device drivers.
22. For optional devices whose driver has not been installed, install the device drivers according to the
instructions supplied in the driver manual.
23. Apply Service Pack as needed according to Chapter 1 (3.8 Applying Service Pack).
24. Execute setup by following the instructions described in Chapter 1 (7. Setup for Solving Problems).
Setup with EXPRESSBUILDER is now complete.