Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
2. Bundled Software for PC for Management
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
275
Chapter 2 Installing the Bundled Software
2.
Bundled Software for PC for Management
This section describes the bundled software required to configure PC for Management used to manage the
server system.
2.1
NEC ESMPRO Manager
NEC ESMPRO Manager can remotely control and monitor the hardware and RAID System of the server.
To use these features, install the designated bundle software such as NEC ESMPRO Agent on the server.
For the operating environment, precautions for use, and detailed settings for NEC ESMPRO Manager, refer to
"NEC ESMPRO Manager Installation Guide" or online help.