Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
1. Bundled Software for the Server
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
273
Chapter 2 Installing the Bundled Software
To install the Microsoft Visual C++ 2005 SP1 library runtime component, select Setup Windows and then
Install
the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) (use x86 regardless of the
CPU architecture) from the autorun menu.
Tips
• Microsoft .NET Framwork
To use the RAID Viewer and Log Viewer, Microsoft .NET Framework Version 2.0
to 3.5 or later is required.
Windows Server 2008 and Windows Server 2008 R2 include .NET Framework
2.0 to 3.5.
Therefore, .NET Framework does not need to be installed when using these
operating systems.
• Microsoft Visual C++ 2005 SP1 library runtime component
To use the RAID Viewer, the Microsoft Visual C++ 2005 SP1 library runtime
component is required.
Windows Server 2008 R2 includes the Microsoft Visual C++ 2005 SP1 library.
Therefore, the Microsoft Visual C++ SP1 library runtime component does not
need to be installed when using these operating systems.
1.5.2
Management by NEC ESMPRO Manager
NEC ESMPRO Manager Ver. 5.5 or later is used to remotely reference and monitor the RAID System that is
managed by Universal RAID Utility.
For details about the operating environment NEC ESMPRO Manager, refer to “NEC ESMPRO Manager
Installation Guide”.