Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
8. Windows OS Parameter File
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
258
Chapter 1 Installing Windows
8.
Windows OS Parameter File
This section describes a parameter file for Windows OS.
8.1
Creating Windows OS Parameter File
If a parameter file is used when performing Setup with EXPRESSBUILDER, a series of setup procedures from
installing of the OS to installing several utilities can be executed automatically just by pressing keys for
confirmation.
The settings from the previous installation can also be used when re-installing the system.
It is therefore recommended to use a parameter file to set up the server.
Tips
Windows can be installed without a parameter file.
A parameter file can be created or modified during Setup with EXPRESSBUILDER.