Installation Guide

7. Setup for Solving Problems
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
256
Chapter 1 Installing Windows
7.3
Installing Network Monitor

Utilizing Network Monitor helps you investigate and manage network troubles.
7.3.1
For Windows Server 2008 R2 and Windows Server 2008
(1) Setting up Network Monitor
Tips
Windows Server 2008 R2 and Windows Server 2008
do not provide Network
Monitor.
To capture network traces on Windows Server 2008 R2 or Windows Server 2008,
Microsoft Network Monitor must be installed using the procedure described below.
1. Download Network Monitor from the following Microsoft web page:
http://support.microsoft.com/kb/933741/en-us
2. Run the downloaded file to start the installer.
Follow the onscreen instructions to install Network Monitor.
Tips
If the Security Alert message appears, click [Run].
In the setup format selection window, select Complete.
Network Monitor installation is now complete.
Tips
To uninstall Network Monitor, use Programs and Features.
(2) Capturing network traces
1. Select Microsoft Network Monitor from the Start menu to start Network Monitor.
2. On the Start Page tab, click [Create a new capture tab... ]. Or, select New from the File menu, and then click
[Capture…].
A new tab for capturing network traces is created.
3. On the Select Networks pane, select the network whose traces are to be captured.
4. Select Start from the Capture menu to start capturing the network traces.
5. Select Stop from the Capture menu to stop capturing the network traces.
6. Select Save As… from the File menu.
The Save As dialog box appears. Select All captured frames from Frame selection, and then enter the
folder and file names.
Tips
The default folder is as follows:
C:\Users\<User name>\Documents\Network Monitor 3\Captures
7. Click [Save].
The network trace file is created in the folder specified in step 6.
The setup for capturing network traces is now complete.