Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
7. Setup for Solving Problems
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
255
Chapter 1 Installing Windows
7.2.2
For Windows Server 2003 (setting up Dr. Watson)
Dr. Watson for Windows is a debugger for application errors. If an application error is detected, Dr. Watson
analyzes the system and records the diagnostic information (log). Follow the procedure below for collecting
diagnostic information.
1. Select Run from the Start menu.
2. Enter drwtsn32.exe in the Open text box, and then click [OK].
The Dr. Watson for Windows dialog box appears.
3. Specify the path to save the diagnostic information file in the Log File Path text box.
The diagnostic information file is saved under the file name DRWTSN32.LOG.
Note
A network path cannot be specified. Specify a path on the local computer.
4. Specify the path to save the crash dump file into the Crash Dump text box.
Tips
A crash dump file is a binary file that can be read by Windows Debugger.
5. For Crash Dump Type, select the Full option button.
6. In the Options group box, select the following check boxes:
− Dump Symbol Table
− Dump All Thread Context
− Append To Existing Log File
− Create Crash Dump File
For details about the function of each option, refer to the online help.
7. Click [OK].
Dr. Watson setup is now complete.