Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
6. Setting Up Windows Server 2003
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
219
Chapter 1 Installing Windows
13. When the following dialog box appears, specify the Service Pack to apply and then click [Open].
Tips
• If you use a Service Pack CD-ROM, when the dialog box above appears, remove
EXPRESSBUILDER DVD from the optical disk drive and then insert the Service
Pack CD-ROM.
• The extension of the Service Pack applicable to Starter Pack is *.exe or *.msu.
No other Service Pack files can be installed.
Installation of the specified Service Pack starts.
When the Service Pack installation completion window appears, restart the system.
14. When the following message prompts you to restart the server, click [Yes] and remove media from the
optical disk drive before restarting.
Installation of Starter Pack is now complete.