Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software

6. Setting Up Windows Server 2003
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
215
Chapter 1 Installing Windows
6.3
Installing Starter Pack
After installing Windows Server 2003, be sure to install Starter Pack and Windows Server 2003 hotfix:
knowledge base (KB) 921411.
Starter Pack contains drivers customized for this server. Be sure to apply Starter Pack before running the
system.
Important
• Starter Pack and Windows Server 2003
hotfix: KB921411 must also be
installed in the following cases. Be sure to install Starter Pack and
Windows x64 hotfix: KB921411 in the following cases:
−
The system configurations have changed (when internal option devices
have been added or removed)
If a dialog box prompting you to restart appears after changing system
configurations, click [No] and then update the system.
−
If the system was restored using a restore process
−
If a system has been restored using the backup tool
• Be sure to install Service Pack 2 (CD-ROM) from Starter Pack.
• If you used a Windows Server 2003 CD-ROM including Service Pack 2 for
installation, you do not have to install Service Pack 2 again.
Note
For Windows Server 2003 R2, make sure that Windows Server 2003 R2 is
displayed in the system properties window before applying a Service Pack.
Tips
If you used the Windows Server 2003 CD-
ROM including Service Pack 2 for
installation, you do not have to install Windows Server 2003 hotfix: KB921411.