Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
5. Setting Up Windows Server 2003 R2 x64 Edition
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
195
Chapter 1 Installing Windows
5. When the following message appears, click [OK].
6. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.
Team deletion is now complete.
5.4.4
When using a SAS controller (N8103-104A/142)
The driver for SAS controller is installed when you apply "Starter Pack".
5.4.5
When using a RAID Controller (N8103-160)
The driver for RAID Controller is installed when you apply "Starter Pack".
Note, however, If RAID Controller (N8103-149/150/151/160) is already used, the driver is automatically
installed.
5.4.6
Graphics accelerator driver
The graphics accelerator driver for standard configurations is installed when Starter Pack is installed from
EXPRESSBUILDER.
To reinstall drivers separately, complete the following steps.
1. Insert EXPRESSBUILDER DVD into the optical disk drive.
If an autorun menu appears, close the menu window.
Tips
You do not have to insert EXPRESSBUILDER DVD if Starter Pack was installed
from Internal Flash Memory.
2. From the Start menu, point to All programs, Accessories, and then select Explorer.
3. Double-click the install.bat icon in the following folder.
When using EXPRESSBUILDER DVD:
Optical disk drive:\024\win\winnt\w2k3amd\video
If Starter Pack was installed from Internal Flash Memory:
System drive:\StartPKG\w2k3amd\video
You will be prompted to confirm the End User License Agreement during this process. Click the
[ACCEPT] button and continue.
4. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.
Graphic accelerator driver installation is now complete.