Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
2. Setting Up the Operating System
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
19
Chapter 1 Installing Windows
2.
Setting Up the Operating System
See the figure below to find a section appropriate to your OS installation.
Start
End
Yes
Windows Server 2008 R2
Setup with E
XPRESSBUILDER
Windows Server 2008
Setup with OS standard installer
Windows Server 2008
Windows Server 2003 R2
x64 Edition
No
Windows Server 2003
Windows Server 2008 R2
Setup for solving problems
Windows Server 2008
Windows Server 2003 R2
x64 Edition
Windows Server 2003
Chapter 1 (7)
Chapter 1 (3.3)
Chapter 1 (4.3)
Chapter 1 (4.4)
Chapter 1 (6.4)
Execute Setup with EXPRESSBUILDER?
Windows Server 2008 R2
Chapter 1 (3.4)
Chapter 1 (5.2)
Windows Server 2003 R2
Chapter 1 (6.3)
Yes
Is the first setup after purchase?
Not installed
Re-installation
Hard disk drive status at purchase
No