Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
5. Setting Up Windows Server 2003 R2 x64 Edition
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
185
Chapter 1 Installing Windows
(3) Setting up team/LiveLink
Important
•
Possible combinations of network adapters that compose the team are as
follows.
When the number of adapters that composes the team is up to four:
−
Between standard network adapters.
−
Between LAN boards.
−
A standard network adapter and LAN boards
Tips
To edit a team, right-click on the BACS team, and then select Edit Team.
Then refer to step 3 and the subsequent steps to edit the team.
1. Double-click the Broadcom Control Suite icon on the Control Panel window.
Broadcom Advanced Control Suite starts.
2. Set a Filter in a TEAM VIEW, right-click the adapter to be used for the team, and then select Create a
Team from the short-cut menu.
The Broadcom Teaming wizard appears.