Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
1. Before Starting Setup
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
17
Chapter 1 Installing Windows
Express5800/R110e-1E
OS
Windows Server
2008 R2
Windows Server
2008
Windows Server
2003 R2 x64 Edition
Windows Server
2003
RAID Controllers supporting OS installation by EXPRESSBUILDER
N8103-128 RAID Controller
(128MB, RAID 0/1)
N8103-149 RAID Controller
(512MB, RAID 0/1)
N8103-150 RAID Controller
(512MB, RAID 0/1/5/6)
N8103-151 RAID Controller
(1GB, RAID 0/1/5/6)
Onboard RAID Controller
(LSI Embedded MegaRAID)
Other options
N8103-104A SAS Controller
N8103-142 SAS Controller
N8103-160 RAID Controller
(1GB, RAID 0/1/5/6)
N8190-153 Fibre Channel
Controller (1ch) (8Gbps/Optical)
* *
N8190-154 Fibre Channel
Controller (2ch) (8Gbps/Optical)
* *
: Supported by EXPRESSBUILDER
* : Supported by accessory of optional board