Installation Guide

5. Setting Up Windows Server 2003 R2 x64 Edition
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
168
Chapter 1 Installing Windows
5.3
Installing Starter Pack
After installing Windows Server 2003 R2 x64 Edition, follow the steps below to install Starter Pack and
Windows x64 hotfix: KB921411.
Starter Pack contains drivers customized for this server. Be sure to apply Starter Pack before running the
system.
Important
• Also install Starter Pack and Windows x64 hotfix: KB921411
in the
following cases:
−
The system configurations have changed (when internal option devices
have been added or removed)
If a dialog box prompting you to restart appears after changing system
configurations, click [No] and then update the system.
−
If the system was restored using a restore process
−
If a system has been restored using the backup tool
• Be sure to install Service Pack 2 (CD-ROM) from Starter Pack.
• If you used a Windows Server 2003 x64 Edition CD-ROM including Service
Pack 2 for installation, you do not have to install Service Pack 2 again.
Note
Before applying a Service Pack, make sure that Windows Server 2003 R2 is
displayed in the system properties window.
Tips
If you used the Windows Server 2003 x64 Edition CD-ROM including Service Pack
2 for installation, you do not have to install Windows x64 hotfix: KB921411 again.
Install Starter Pack after applying Windows x64 hotfix: KB921411.
If Windows Server 2003 R2 x64 Edition is operated in the following environment, the system might halt while
returning from the hibernation state:
− The system is in a multi-processor configuration
− Service Pack 2 has not been installed
To set hibernation, apply Service Pack 2 or KB902839 hotfix*.
* KB902839 can be obtained from the following website:
http://support.microsoft.com/kb/902839/en-us