Installation Guide

1. Before Starting Setup
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
16
Chapter 1 Installing Windows
1.4
Mass Storage Controllers Supported by EXPRESSBUILDER
The table below lists the controllers for this server, supported by the supplied EXPRESSBUILDER.
If an optional board not mentioned below is connected, set it up while referring to the instructions supplied with
the board and Chapter 1 (1.4 When Using a Mass Storage Controller Not Supported by EXPRESSBUILDER).
Express5800/GT110e
OS
Windows Server
2008 R2
Windows Server
2008
Windows Server
2003 R2 x64 Edition
Windows Server
2003
RAID Controllers supporting OS installation by EXPRESSBUILDER
N8103-128 RAID Controller
(128MB, RAID 0/1)
   
N8103-149 RAID
Controller(512MB, RAID 0/1)
   
N8103-150 RAID Controller
(512MB, RAID 0/1/5/6)
   
N8103-151 RAID Controller
(1GB, RAID 0/1/5/6)
   
Onboard RAID Controller
(LSI Embedded MegaRAID)
   
Other options
N8103-104A SAS Controller
   
N8103-142 SAS Controller
   
Express5800/GT110e-S
OS
Windows Server
2008 R2
Windows Server
2008
Windows Server
2003 R2 x64 Edition
Windows Server
2003
RAID Controllers supporting OS installation by EXPRESSBUILDER
N8103-128 RAID Controller
(128MB, RAID 0/1)
   
N8103-149 RAID
Controller(512MB, RAID 0/1)
   
N8103-150 RAID Controller
(512MB, RAID 0/1/5/6)
   
N8103-151 RAID Controller
(1GB, RAID 0/1/5/6)
   
Onboard RAID Controller
(LSI Embedded MegaRAID)
   