Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
146
Chapter 1 Installing Windows
4.7
Installing the Bundled Software
The supplied EXPRESSBUILDER DVD contains the server monitoring software NEC ESMPRO Agent and
system management software NEC ESMPRO Manager.
You can install NEC ESMPRO Agent automatically by performing Setup with EXPRESSBUILDER.
Open the Programs or Control Panel window from the Start menu, and make sure that the folders for the utilities
you have installed are contained. If you did not install them at the time of Setup with EXPRESSBUILDER, refer
to Chapter 2 Installing the Bundled Software to install the software separately.