Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
131
Chapter 1 Installing Windows
9. Double-click BhdDisabled.vbs in the following folder.
• When using EXPRESSBUILDER DVD:
<Windows Server 2008 64-bit Edition >
Optical disk drive:\024\win\winnt\ws2008x64\lan
<Windows Server 2008 32-bit Edition >
Optical disk drive:\024\win\winnt\ws2008\lan
• If Starter Pack was installed from Internal Flash Memory:
<Windows Server 2008 64-bit Edition >
System drive:\StartPKG\ws2008x64\lan
<Windows Server 2008 32-bit Edition >
System drive:\StartPKG\ws2008\lan
10. When the following message appears, click [OK].
11. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.
Setup is now complete.
(3) Using N8104-132/133/138
Using N8104-132/133/138 with the server, follow the procedure below to set it.
1. Insert EXPRESSBUILDER DVD into the optical disk drive.
If Autorun Menu appears, close the menu.
Tips
EXPRESSBUILDER DVD is unnecessary if Starter Pack was install
ed from
Internal Flash Memory. Proceed to the next step.
2. Double-click to the following file.
− When using EXPRESSBUILDER DVD:
<Windows Server 2008 64-bit Edition >
Optical disk drive:\024\win\winnt\ws2008x64\lan\pgdyavd_Disable.vbs
<Windows Server 2008 32-bit Edition >
Optical disk drive:\024\win\winnt\ws2008\lan\pgdyavd_Disable.vbs
− If Starter Pack was installed from Internal Flash Memory:
<Windows Server 2008 64-bit Edition >
System drive:\StartPKG\ws2008x64\lan\pgdyavd_Disable.vbs
<Windows Server 2008 32-bit Edition >
System drive:\StartPKG\ws2008\lan\pgdyavd_Disable.vbs
3. When the following message appears, click [OK].
4. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.
Setup is now completed.
Black Hole Router Detect Disable Completed, Reboot the system
Configuration Completed
[Option:PopUp RLV Disabled(Action:Done)]
Reboot the system