Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
12
NEC Express5800 Series
Express5800/GT-110e, GT-110e-S, R110e-1E
Installing Windows
This chapter describes how to install Windows. Read through this chapter to set up the system correctly.
1. Before Starting Setup
Describes the Service Packs and mass storage controllers that support EXPRESSBUILDER supplied with
this product
2. Setting Up the Operating System
Describes the flow chart of setting up the operating system
3. Setting Up Windows Server 2008 R2
Describes how to set up Windows Server 2008 R2
4. Setting Up Windows Server 2008
Describes how to set up Windows Server 2008
5. Setting Up Windows Server 2003 R2 x64 Edition
Describes how to set up Windows Server 2003 R2 x64 Edition
6. Setting Up Windows Server 2003
Describes how to set up Windows Server 2003
7. Setting Up for Solving Problems
Describes the features that must be set up in advance so that the server can recover from any trouble
immediately and precisely
8. Windows OS Parameter File
Describes how to set up the operating system by using the parameter file.
1
1