Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
118
Chapter 1 Installing Windows
Full installations:
(1) After setup of Windows Server 2008 is completed, the following window appears, prompting you
to change your password before logging on. Click [OK].
(2) Change your password, and then click the [
] button.
Tips
Passwords must fulfill the following requirements in Windows Server 2008.
−
Contains 6 or more characters
−
Contains characters from at least three of the following categories: numbers,
uppercase letters, lowercase letters, and symbols.
(3) When the following message appears, click [OK].
(4) When the Initial Configuration Tasks window appears after you log on, enter the user
information.