Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
117
Chapter 1 Installing Windows
34. Select the partition created in step 33, and then click [Format].
35. In the window below, select the created partition, and then click [Next].
When the following message appears, Windows installation starts automatically.
Tips
At this time, if EXPRESSBUILDER DVD is still in the optical disk drive, the
message prompting you to replace it with an OS installation media appears.
Remove EXPRESSBUILDER DVD and then insert the OS installation media.
Install Windows – Insert Disc
Please insert Windows installation disc 1.
OK Cancel
36. The content displayed differs depending on what you selected in step 25. Confirm the following, and
then proceed.