Installation Guide
Table Of Contents
- Cover
- Documents Provided with This Product
- Contents
- Notations Used in This Document
- Trademarks
- Regulatory Notices
- Warnings and Additions to This Document
- Chapter 1 Installing Windows
- 1. Before Starting Setup
- 2. Setting Up the Operating System
- 3. Setting Up Windows Server 2008 R2
- 4. Setting Up Windows Server 2008
- 4.1 Before Starting Setup
- 4.2 Setup with EXPRESSBUILDER
- 4.3 Setup with OS Standard Installer
- 4.4 Installing Starter Pack
- 4.5 Setting Up Device Drivers
- 4.6 Specifying PAE Option
- 4.7 Installing the Bundled Software
- 4.8 License Authentication
- 4.9 Applying Service Pack
- 4.10 Installation When Multiple Logical Drives Exist
- 5. Setting Up Windows Server 2003 R2 x64 Edition
- 6. Setting Up Windows Server 2003
- 7. Setup for Solving Problems
- 8. Windows OS Parameter File
- Chapter 2 Installing the Bundled Software
4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
114
Chapter 1 Installing Windows
23. Select LSI Embedded MegaRAID, and then click [Next].
24. When the following window appears, enter the product key and then click [Next].
Note that this window does not appear if you use Backup DVD-ROM for installation.
Tips
• The above message appears if you are using an onboard RAID controller (LSI
Embedded MegaRAID) in an environment equipped with an internal DVD drive.
• When this message appears, the message will say “CD, DVD, or USB flash
drive”, but use Internal Flash Memory or removable media with the OEM
drivers copied onto it.
25. When the following window appears, select the Windows edition you have purchased.
Select I have selected the edition of Windows that I purchased check box, and then click [Next].
If the product key was entered, only the corresponding editions are displayed.
Tips
The Windows versions that appear on the screen differ depending on the OS
installation media used.