Installation Guide

4. Setting Up Windows Server 2008
press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)
113
Chapter 1 Installing Windows
21. When the following message appears, click [Install Now ].
Windows Server 2008 installation starts.
- If the following message appears, go to step 22.
- If not go to step 24.
Load Driver
A required CD/DVD drive device driver is missing. If you have
a driver floppy disk, CD, DVD, or USB flash drive, please insert
it now.
Note: If the Windows installation media is in the CD/DVD drive,
you can safely remove it for this step.
[Browse] [OK] [Cancel]
Tips
• The above message appears if you are using an onboard RAID Controller (LSI
Embedded MegaRAID) in an environment equipped with an internal DVD drive.
• When this message appears, the message will say “CD, DVD, or USB flash
drive”, but you must use Internal Flash Memory or removable media with the
OEM drivers copied onto it.
22. Select the destination, and then click [OK].
If using OEM drivers (made at step 17)
• Windows Server 2008 x64
Removable media:\OEM_Driver\ ws2008x64\megasr1
• Windows Server 2008 x86
Removable media:\OEM_Driver\ ws2008\megasr1
If using Internal Flash Memory
• Windows Server 2008 x64
Internal Flash Memory:\024\win\winnt\oemfd\ws2008x64\megasr1
• Windows Server 2008 x86
Internal Flash Memory:\024\win\winnt\oemfd\ws2008\megasr1
Tips
The volume label of Internal Flash Memory is INTER-FLASH.