User's Guide

4-14 Configuring Your Server
PCI Device, Onboard VGA
Option Parameter Description Your Setting
Onboard VGA
Option ROM Scan
[Auto]
Force
Selects whether the option ROM of
onboard video controller is executed
automatically for forcedly.
When [Auto] is selected, the ROM of the
VGA card is preferentially scanned.
[ ]: Factory-set
PCI Device, Onboard Lan
Option Parameter Description Your Setting
LAN Controller Disabled
[Enabled]
Enables or disables onboard LAN
controller.
LAN Option ROM
Scan
Disabled
[Enabled]
Enables or disables an option ROM of
onboard LAN controller.
[ ]: Factory-set
Peripheral Configuration
IMPORTANT: Note that the interrupt and/or base I/O address are not
overlapped with others.
Option Parameter Description Your Setting
Serial Port A Disabled
[Enabled]
Selects whether serial port A is enabled or
disabled.
Base I/O
address
[3F8h]
2F8h
3E8h
2E8h
Selects the base I/O address for serial port
A.
Interrupt IRQ 3
[IRQ 4]
Selects the interrupt for a serial port A.
Serial Port B Disabled
[Enabled]
Selects whether serial port B is enabled or
disabled.
Base I/O
address
3F8h
[2F8h]
3E8h
2E8h
Selects the base I/O address for serial port
B.
Interrupt [IRQ 3]
IRQ 4
Selects the interrupt for a serial port B.
SATA RAID
Enable
[Disabled]
Enabled
Indicates whether the RAID disk drives that
uses the onboard SATA is enabled or
disabled. (View only)
To enable or disable the RAID system, use
the jumper switch on mother board.
[ ]: Factory-set