User's Guide

Installing Windows Server 2008 E-19

Change the password, and then click the button.

NOTE: Administrator password that satisfy the next condition, are

required.

 More than 6 characters

 Contains characters from three of the following categories (numbers,

uppercase letters, lowercase letters, and signs)

6. When the following message appears, click [OK].

7. At the command prompt, enter user information.

NOTE: For more detailed procedure, see the "Microsoft Windows

Server 2008 Step-By-Step Guide".

After installations is completed, be sure to execute the tasks described in "Setup of Device Driver

(Normally Install in Server)" and "Updating the System" of this chapter.