User's Guide

10-4 Internal Cabling Diagrams
When a SAS Hard Disk Drive, SATA Hard Disk Drive, or Solid State Drive is
Connected to the RAID Controller
If any drive is connected to the RAID Controller, you need the dedicated interface cable for
connection.
 3.5-inch hard disk drive: K410-221(00) Internal SAS cable
 2.5-inch hard disk drive: K410-220(00) Internal SAS cable
Fill the hard disk drive cage with the hard disk drives from the bottom to top.
NOTES: The RAID Controller must be connected when using a SAS
hard disk drive.
IMPORTANT:
 SAS and SATA hard disk drives cannot be installed together.
 RAID LED cable
To let the DISK Access lamp on the front panel indicate the access
states of the hard disk drives connected to the RAID Controller,
connect the LED cable provided with the server to the LED
4th hard disk drive
3rd hard disk drive
2nd hard disk drive
1st hard disk drive
Power
Unit
Mother board
Optical disk drive
SATA cable (for optical disk drive)
SAS cable
K410-220(00) or
K410-221(00)
RAID Controller
(N8103-109/116A/117A)
5.25-inch device bay