Technical Reference Guide

ftServer Setup Menus
5-14 Express5800/320Ma: Technical Reference Guide
Console Redirection Submenu
Select Console Redirection from the Advanced menu to display the Console
Redirection submenu, which is shown in Figure 5-7. Use the legend bar keys to make
your selections and exit to the Main menu.
Figure 5-7. Console Redirection Menu
Table 5-7 describes the Console Redirection submenu features.
Embedded SATA Enabled
Disabled
Enables or disables the embedded
SATA option ROM to boot from the
device. Enabled by default.
Embedded: IDE,
PXE#1, or PXE#2
Enabled
Disabled
Enables or disables the embedded
IDE, PXE#1, or PXE#2 option
ROMs, respectively, to set up and
boot from the device. Enabled by
default.
Table 5-6. PCI Configuration Features (Continued)
Feature Options Description
ftServer Setup
Advanced
Console Redirection
Com Port Address: [On-board COM B]
Baud Rate: [9600]
Console Type: [VT100]
Flow Control: [None]
Console Connection: [Direct]
Continue C.R. after POST: [Off]
Item Specific Help
Additional setup
menus to configure
console.
F1 Help ↓↑ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit ←→ Select Menu Enter Select
* Sub-Menu F10 Save and Exit