Technical Reference Guide

Device State and Threshold Alarms
System Alarm Messages 4-9
4 dev '%1' broken: diagnostics failed. Yes P,E
5 dev '%1' broken: hardware incompatible. Yes P,E
6 dev '%1' broken: holding dump. Yes P,E
7 dev '%1' broken: bring-up failed. Yes P,E
8 dev '%1' broken: media disconnected. Yes P,E
9 dev '%1' broken: firmware burn failed. Yes P,E
10 dev '%1' broken: firmware burn failed, file not
found.
No –
11 dev '%1' broken: firmware burn failed, file error. No –
12 dev '%1' broken: firmware error. Yes P,E
13 dev '%1' broken: firmware burn failed, autoburn
disabled.
Yes P,E
14 dev '%1' broken: cannot read ID PROM. Yes P,E
15 dev '%1' below critical threshold. Yes P,E
16 dev '%1' above critical threshold. Yes P,E
17 dev '%1' below fatal threshold. Yes P,E
18 dev '%1' above fatal threshold. Yes P,E
19 dev '%1' below warning threshold. No P,E
20 dev '%1' above warning threshold. No P,E
21 dev '%1' disconnected. Yes –
Table 4-8. Alarm Messages and Message Destinations (Continued)
Alarm Message
Number from
Table 4-1 through
Table 4-7 Alarm Message
Send to
NEC
Technical
Support
Send to
Pager
Email