Technical Reference Guide

ftSMC Component Properties
ftSMC Component Properties and Actions 3-23
Type of MTBF Defines how a threshold value is used when a device breaks.
Usually set to Use Threshold, which means that the threshold value
is used to determine whether to bring the device automatically back
into service.
UpperThresholdCritical Threshold values specify the ranges for determining whether the
monitored component is operating under normal, noncritical, critical,
or fatal conditions. Depending on the sensor, values are in degrees
Celsius (
o
C), millivolts (mV), revolutions per minute (rpm), or
milliamperes (mA).
UpperThresholdFatal Threshold values specify the ranges for determining whether the
monitored component is operating under normal, noncritical, critical,
or fatal conditions. Depending on the sensor, values are in degrees
Celsius (
o
C), millivolts (mV), revolutions per minute (rpm), or
milliamperes (mA). This property is not configurable and attempting
to change it will display the value of Not Set.
UpperThresholdNonCritical Threshold values specify the ranges for determining whether the
monitored component is operating under normal, noncritical, critical,
or fatal conditions. Depending on the sensor, values are in degrees
Celsius (
o
C), millivolts (mV), revolutions per minute (rpm), or
milliamperes (mA).
Value Specifies the component number of the partner. For instance, a
value of 0 indicates that the partner of the highlighted CPU element
is in element 0.
VendorID PCI SIG-assigned ID to uniquely identify chip-set vendor.
Verify RDR Virtual Disk Verifies the integrity of RDR disk mirrors.
WBEM Poll Time Number of seconds that the Policy Service waits for checking the
state of the WMI service and executes a recovery procedure if the
WMI service has restarted. The default is 120 seconds (2 minutes).
WBEM Timeout Number of seconds that the Policy Service waits for WMI to
complete an operation. The default is 120 seconds (2 minutes).
WDTEnable Enables (True) or disables (False) the Watchdog Timer.
Zip Code Zip code, or equivalent, where your company is located.
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property Description