Technical Reference Guide

ftSMC Component Properties
ftSMC Component Properties and Actions 3-21
Startup Time Number of seconds that the Policy Service waits for the system to
reach a quiescent state after booting.
State State, province, or other political entity where your company is
located.
Status Provides the status of a system inventory component.
StatusLEDColor Provides the state of the Status LED.
StorageProcessor The type of processor in the attached storage system.
StorageSerialNumber The serial number of the attached storage system.
StorageType The product family name of the attached storage system.
Support Phone Telephone number (1-866-269-1239) that you call to reach NEC
Technical Support or your service representative. This number is for
information only, as ftServer Manager does not use this number.
You should make a note of this telephone number in the event you
need support and your system is not functioning.
Street[1] Field containing the address (street, department, mail stop, PO box,
and so on) where your company is located.
Street[2] A second field containing the address (street, department, mail
stop, PO box, and so on) where your company is located.
SubNetMask For systems equipped with VTMs. A 32-bit structure that tells
TCP/IP which bits in a given address specify the network ID and
which specify the subnetwork ID (for example, 255.255.255.0).
SubsystemID ID of board among boards from vendor with the same chipset.
SubSystemVendorID PCI SIG-assigned ID to uniquely identify PC board vendor.
SummaryScreen Specifies whether the Summary screen should be displayed before
Windows is started.
System Email Address The email address to be used in the “From” field of a user
notification alarm message (for example,
[e-mail]).
SystemEventLoggingEnabled Enables (True) or disables (False) the logging of events to the
system event log.
System: IDPROM:
ArtworkRevision
The artwork revision of a board. Board identification information is
stored in IDPROM on boards manufactured by NEC Solutions
(America).
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property Description