Technical Reference Guide

ftSMC Component Properties
ftSMC Component Properties and Actions 3-5
Diag Status:
FailingTestNumberr
If diagnostic test(s) failed, the number of the diagnostic test(s) that
failed.
Diag Status:
NumberOfFailedTests
The number of errors encountered. See the system event log for a
description of the errors.
Diag Status: TimeOfLastRun Date and time when diagnostics most recently ran.
DiagnosticStatus The VTM diagnostic status.
Dial-in Password Password used to authenticate a dial-in user name.
Dial-in User Name Dial-in user name used to identify the ASN dialing in. After the
system authenticates the name, the system hangs up and dials the
ASN.
Drive The drive letter, including the colon, of the file.
DriverName The driver file name of the device.
DriverServiceName Name of the service supporting this driver.
DriverVersion Version number of the driver.
DumpNumberOfFilesToSave Sets the number of dump files to save to disk for a system dump.
For example, if this value is 2, the last two dump files
(Memory0.dmp and Memory1.dmp) are saved and the third dump
file overwrites the first. Thus, you need to reserve disk space of the
size of memory times this number for the dump files. The valid
range is 1 to 5, and the default is 2.
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property Description