Technical Reference Guide

ftSMC Component Properties and Actions 3-1

Chapter 3

ftSMC Component Properties and

Actions

This chapter describes a number of the properties and actions associated with ftSMC

system inventory components.

ftSMC Component Properties

Table 3-1 describes many of the properties of ftSMC system inventory components.

For component properties not described in the following table, use What’s this? Help

in ftSMC details pane for information.

Table 3-1. ftSMC System Inventory Component Properties

Property Description

ActiveCompatibilityFlag Specifies whether the I/O element is active (True) or inactive

(False). The active element is the one that contains the active

device of a pair of devices, the other of which is installed on the

inactive I/O element.

ActiveRDRPlex The address of the path that is the current active RDR plex.

AdapterDeviceName Express5800/320Ma part number and description of PCI adapter.

ASN For Call-home Displays the numerical designation of the current active ASN

configuration. VTMs and ftSMC obtain the parameters for a call

home by reference to this property. The parameters in the active

ASN configuration are then used to establish a connection to the

active ActiveService Network (ASN), whether it is the NEC

Technical Support. The default active ASN configuration is 1. See

the Set as Active ASN action in Tabl e 3- 2.

AutoBringUpEnabled Brings a new CPU element in the system into service immediately if

this is enabled. The valid choices are True or False, with True

(enabled) as the default.