User's Guide

4-16 System Configuration

Option Parameter Description Your Setting

POST Pause

Monitoring

Time-out

1 - [3] - 20 Specify the POST monitoring time period during

boot-up restriction.

[ ]: Factory-set

IMPORTANT:

When connecting a Fibre Channel disk array device, change the set value of “Boot Monitoring

Time-out Period” depending on the wait time for the completion of the Fibre Channel disk

array device initialization.

Example: If the wait time for the completion of the Fibre Channel disk array device

initialization is 4 minutes, change the value of “Boot Monitoring Time-out Period” from 10

(default) to 14 minutes.

Option ROM

Select "Option ROM" on the Advanced menu to display the following screen and enable/disable

expansion of Option Rom BIOS on the PCI bus.

Phoenix BIOS Setup Utility

On Board SCSI:

On Board LAN 1:

On Board LAN 2:

PCI Slot 1:

PCI Slot 2:

PCI Slot 3:

Disables/enables the

mapping of the on-board

IOSSCSI B .

elp

Item Specific HelpOption R

[Enabled]

F1 H

-/+ C ange Values h

Enter Select

F9 Setup Defaults

F10 Save Changes & ExitSub-Menu

Esc E

Select Item

enuSelect M

Advanced