Setup Guide

Windows Setup 4-30
2. Right-click the disk (Slot 1 of PCI module 0) on which the system is installed on the left
pane of the [RDR Utility] window, and click [Create RDR Virtual Disk].
TIPS:
Depending on the disk status, it takes time to set RDR, and RDR Utility may be
stopped for a few minutes. This is not an error. Please wait for a while.
3. Click [Yes].
4. Click [OK].
IMPORTANT:
If you set RDR on the disk that includes a system partition or a partition that
cannot be unmounted, the message on the right is displayed. Click [Yes]. The
system is restarted after 2 minutes. After it is restarted, perform the steps 5 and
later.