System Release Notes Express5800/140Hb System Release Notes PN: 455-01598-002
Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC Computers Inc.
Express5800/140Hb System Release Notes The Express5800/140Hb System Release Notes provide up-to-date information on your system. These notes also provide additional valuable information about your system that was not included in the user’s guide. Please read these notes in their entirety. CONTENTS Introduction ............................................................................................................................................3 General Comments .......................................
nec
Introduction These System Release Notes cover the following topics: ! General Comments ! Advisories ! Documentation Errata. General Comments The following general comments apply to this server. ! Versions of the Network Operating Systems tested and recommended are: Windows® 2000 Windows NT® 4.0 Server with Service Pack 6 Novell® NetWare® 5.1 SCO OpenServer™ 5.05 with Maintenance Supplement 505A. UNIXWare® 7.1.
! The Administrator Menu in the System Information Management segment of the Offline Maintenance Utility is accessible only by NEC authorized service representatives. ! EXPRESSBUILDER operates in floppy emulation mode. The emulated floppy drive portion of your system CD-ROM is designated Drive A and the remaining portion(s) of the CD-ROM is designated Drive Q. Your system diskette drive is Drive B.
Documentation Errata The following changes apply to the Express5800/140Hb User's Guide (456-01546-000) located on the EXPRESSBUILDER CD-ROM: ! Chapter 3, Configuring System Board Jumpers. Replace Figure 3-2 System Jumpers with the following figure. A Processor speed jumper block (located in the CPU cage) D Battery power control/reset jumper block B System function jumper block E System board C Dump/reset jumper block Figure 3-2.
6 Express5800/140Hb System Release Notes
