User's Guide

Setting Up the System 2-35
port 2.
P POST lamps (on the system board). The lamps are mounted onboard. They are on during
POST after the power is turned on.
Q Speed lamp (amber). This lamp indicates the transmission speed of the LAN port 2.
R Speed lamp (amber). This lamp indicates the transmission speed of the LAN port 1.
S LAN PORT 1 connector. Connects the server to the LAN network.
T LINK/ACT lamp (green). This lamp indicates the access status of LAN port 1.
U LAN PORT 2 connector. Connects the server to the LAN network.
V LINK/ACT lamp (green). This lamp indicates the access status of LAN port 2.
W SCSI connector. Connect external SCSI device to this connector.
X Rear VGA connector. Connect a display unit to this connector.
Y USB connector. Connect a USB-compliant device this connector. (Windows NT 4.0 needs
the compliant driver.)
Figure 2-37. Rear View Controls and Indicators